Sparkling silver has long been a source of fascination for people, who use it for jewelry, coins, high-end household goods, status symbols, and many other things. Silver is mostly used in ceremonials, rituals, and milestone recognitions and is prized for its beautiful embellished value. But how much do you know about silver and the jewelry you wear made of silver? What exactly is sterling silver?
What Is Sterling Silver?
One of the most frequently utilized metals in high-end, high-quality jewelry and accessories today is sterling silver. True sterling silver must have a specific percentage of silver; any other silver alloy cannot be branded as such. You will undoubtedly want to understand the distinction between pure silver and 925 sterling silver if you’re thinking about purchasing sterling silver jewelry. In reality, pure silver is not entirely made of silver. 99.9% is silver, with the remaining 0.1% made up of other metals like copper.
Contrarily, 92.5% of the weight of sterling silver is made up of silver, with the remainder being primarily copper. Because of this, 925 Sterling Silver—or just Silver—is a common abbreviation for sterling silver. Due to its malleable and soft nature, pure silver is exceedingly difficult to work into beautiful forms, which is why it must be mixed with other metals. In addition, a certain amount of hardness is added by including other metals, such as copper. Because of this, jewelers may create the most intricate and complicated designs with 925 sterling silver.
In most cases, sterling silver jewelry is considered as the most high-quality jewelry and is an amazing jewelry option. The metal does not rust or deteriorate very quickly, and if you take proper care of your jewelry, it will continue to look amazing for a longer duration. Even future generations should be able to inherit your silver jewelry. In addition, jewelry made of sterling silver can help you express your personality and make a striking statement. Be bold with original designs that showcase your sense of flair.
Process For Making A Sterling Silver Three-Part Ring
This article outlines the procedures for making a sterling silver, three-part ring-
By casting a reasonably affordable metal in an ingot mold, a stylish design can be made that too at a very low price point. In addition, use of silver casting grain also reduces the expenses and increases revenue.
- Using an ingot mold, pour an ingot with the help of sterling silver casting grain of 17.5dwt.
- The stock is annealed and rolled out until it is as thick as 2 mm. The stock should be flattened after a second annealing. To make it easier to check the lines you need to follow the step, and darken it using a Sharpie.
- Cut out two stock pieces which are 2 mm thick, wide till 3 mm and long to 58.1 mm to make a size 6 three-part ring.
- For the central band, you’ll have to roll and cut the piece that measures the thickness of 1 mm, wideness of 3 mm and should be long to 61.1 mm.
- Create rings out of all the three pieces from the stock. Take a ring mandrel, solder each and every piece and true them individually. Ensure that the sizes of the two outermost rail bands are precisely the same.
- The center band should be slightly smaller and later stretched to fit. 1.6 mm from its edge, make a mark on the top of the outermost rail bands.
- Take a mark 1 mm away from the ring’s inner diameter on the side of the bands. We’ll use these marks as a guide.
- On the side of the ring towards the second mark which you have marked above, cut a groove with a cut-off disc alongside the 1.5 mm line.
- Grind away any extra metal using a rotary file. Erase the last particle of metal with a file to level the metal up to the mark of 1 mm.
To make the second 2 mm thick band, repeat this procedure.
- The center band will have a beautiful groove to nestle in when you will place the two side by side. The inner edge of the 1 mm thickness band in the center should be beveled using a half-round file. Proper fit and easier construction are the results of doing this.
- The central band should be marked with lines spaced at 6.2 mm apart. These will serve as the design guidelines. Next, cut a few tiny grooves inside the 6.2 mm markers on either side of the middle band with a crossing file. On the central band, you can go with any creative pattern that you desire.
- Sandblast the core band to create contrast while high-polishing the two surrounding bands. Finish off by joining these components with the help of solder or laser welding.
- This method of building the ring creates a sharp contrast between the components and makes it simpler to maintain the center band’s polish.
- With this three-part ring procedure, you can express your creativity.
Conclusion
Purchasing stainless steel jewelry wholesale, whether a sterling silver pendant or a ring, involves quite an investment. But because its value advances over time, it is a wise investment.
When properly cared for, sterling silver is one of those metals that will endure a lifetime. When not in use, silver jewelry can be kept reasonably by being properly stored in airtight pouches or other containers.
So now you know the detailed process for making a three-part silver ring. Next, you can explore the best sterling silver rings wholesale collection at P&K Jewelry. Enhance your style statement and elevate your wardrobe with the best jewelry pieces today.